Conducting the preventive maintenance of your pallet truck is of great importance. By performing a daily examination of your pallet truck, you will be able to intervene when it requires repairs. Consequently, regular inspections help avoid unforeseen problems and extend the service life of the pallet truck.
Being the reputed provider of the power pallet truck, we bring you detailed information about the considerations that must be made to make the most of your product.
The manufacturer always greases all of the bearings and axles with high-temperature lubricant to ensure long operational life. Keep the pallet trucks lubricated with this grease every month or after each cleaning by greasing the lubricating points, including the tires, shafts, and grease connectors.
According to the rulebook, it should go without mentioning that using a pallet truck on an inclination is not generally a good idea. In simple terms, slopes improve the probability of an accident occurring since it is more difficult for operators to keep control of the jack. On the other hand, it may be required to navigate an inclination at times. If you have to climb an incline, be sure you’re using a pulley system.
It is advised that you monitor the oil level in your pallet truck after every six months and that you top it up or refill the oil at least once a year. Pallet trucks should be lubricated with hydraulic oil. When heated to 40 degrees Celsius, the oil must have a viscosity of 30cSt and a total volume of around 0.04 liters. Using another type of oil may make pumping up the pallet truck more difficult because the oil will be thicker.
To top off the oil in your pallet truck, follow the steps that have been mentioned below:
Are you not able to lift the forks when the lever is pumped in the raise position? If yes, then it is due to the air bubbles in the hydraulic fluid caused by transportation.
Working in a clean environment makes the job more enjoyable and safe when using the pallet truck. The terrain on which the pallet trucks are used must have a significant impact on the performance of the wheels. Any dirt or broken metallic wire can become trapped between the wheels, causing them to wear down much more quickly. It can be avoided by routinely washing the wheels and eliminating this dirt before driving the pallet truck.
It is wise to keep a check for ledges and slopes. A quick cut may appear to be a good idea, but your wheels may not be on the same page. Instead, take a diversion to avoid having your wheels shatter due to this situation.
The wheels of your pallet truck can also be seriously damaged if you overload it. We recommend you to opt for two journeys than one heavy trip, even if it takes longer. In this way, you can keep the wheels from flattening so they last longer.
According to the experts, employees must pull the pallet jack whenever possible. Using your hands to push the machinery may make it less efficient and increase the likelihood of hitting something when going around a corner that you couldn’t see coming.
Inspect to see that the chain of your pallet truck is still in the proper position regularly. This issue is most noticeable when the forks are no longer lowered during operation. It is a simple problem that may be resolved by reattaching the chain to the lever.